ZEN15-800LR Power Switch Firmware 2.10 Release Notes

Firmware: 2.10 (released 05/2024)

  • Added Notification Command Class. The Power Switch will now report “Over-current detected” when parameter 20 “overload protection” is triggered.
  • Added parameter 175 - Voltage threshold report. See all settings here.
  • Added parameter 176 - Electricity threshold report. See all settings here.
  • Added parameter 36 - Turn the power switch on again after the overload protection is triggered. See all settings here.
  • Modified parameter 20: The overload protection cannot be turned off anymore, and it can be adjusted between 2 - 5 seconds.
  • Fixed a bug when the Power Switch could turn off in edge cases when a large appliance like a dryer was initially starting. The Power Switch will no longer turn off on the initial start-up unless overload protection is triggered.

We don’t recommend updating your device unless you’re missing any of the functionality listed in the changelog and the update is absolutely necessary. Before you attempt an update on your device, please read this first:

  • Remember to unzip the file after downloading it before using it to update your device. 500 series device files will use the .otz or .hex format while 700/800 series device files will use the .gbl format.
  • Always double-check that you’re applying the correct firmware file to the right model and version of your Zooz device. Loading the wrong version to your device may deem it unusable.
  • You may need to exclude and re-include the device after the update is complete for best performance. Please consider you may need to rebuild all of your automations and settings for the device.

ZEN15 2.10 OTA Firmware File here. Update at your own risk.

Get firmware files and learn more about updating your Z-Wave devices here