ZEN16 VER 2.0 MultiRelay Firmware 2.10 Release Notes

Firmware: 2.10 (released 05/2024)

  • Added a new value for parameter 24 “DC Motor mode” for the application with 3-speed fans/motors, so that only 1 relay can be turned on at the same time
  • Fixed setting bug: you can now set any value for parameters 2, 3, and 4 (input type) when parameter 24 (DC motor mode) is set to value 1 or 2 (enabled).
  • Fixed a bug with the auto turn-off timer for R1, R2, and R3 whenever parameters 12, 13, and 14 are changed from value 1 to 0. Parameters 2, 3, and 4 values 0-10 were affected.
  • Added new settings to set input trigger duration (parameters 28, 29, and 30, see all settings here)
  • Added new setting to assign fixed on or off actions to inputs (parameter 31, see all settings here)

We don’t recommend updating your device unless you’re missing any of the functionality listed in the changelog and the update is absolutely necessary. Before you attempt an update on your device, please read this first:

  • Remember to unzip the file after downloading it before using it to update your device. 500 series device files will use the .otz or .hex format while 700/800 series device files will use the .gbl format.
  • Always double-check that you’re applying the correct firmware file to the right model and version of your Zooz device. Loading the wrong version to your device may deem it unusable.
  • You may need to exclude and re-include the device after the update is complete for best performance. Please consider you may need to rebuild all of your automations and settings for the device.

ZEN16 2.10 OTA Firmware File here. Update at your own risk.

Get firmware files and learn more about updating your Z-Wave devices here